Hello everyone! Today, letโs take a look at the C63 launched by MOULDKING. I believe many friends are attracted by this handsome car model, right? How does the finished product perform? Let’s take a look at it soon!
Box photo
The back of the box is a brief introduction.
List of power components.
Contents
After opening the box, see the AB inner box.
Let’s take a look at Box A first.
There is a manual. It should be noted that the dark gray and light gray plugs are easily used incorrectly. (However, it does not affect the structure at all)
Sticker
There are 2 photos in total, all with a transparent bottom, and the quality is very good. The size of No. 33 is too large, and the remaining problem is that there will be a bottom-through phenomenon and those magically changed LOGO…
Parts kit
There are 4 steps of subcontracting and power components in box A.
Box B is sub-packaged, tires and light components in 3 steps.
The remote control comes with a battery and a screwdriver, which is very considerate.
Assembling process
The manual does not indicate the placement of the motor cable, this should be paid attention to when assembling.
Itโs great to use multiple colors to distinguish the direction! It’s just that the different colors in some locations have little meaning, but it slightly affects the fluency.
The tires in box B are used here, and the chassis is basically completed. At this stage, you can test the car to see if there are any problems with the function.
Next is the assembly of the car body. Many foundation bricks are used for car lights.
Install the door.
The assembly of the rear of the car has begun.
Found the winning piece, this one should have been crushed during subcontracting. Fortunately, it doesn’t affect the appearance…
Forgot to install the short bolts when putting together the tail wing, so it was soft
The roof structure is good, making the body more streamlined!
There is no detailed assembly instructions for the lighting group this time, so I will study it later when I have time. The finished picture is directly below.
Multi-faceted photo of the finished product
Detail part
The front of the car uses many different types of structures to restore its shape.
The front cover of the car is fixed with a cross shaft in the manual, but in order to be able to open it, I did not install it. (Although there is nothing special inside)
The wheel shell cover is an electroplated part, and the effect is very good.
The design of the car side is very clever, but the order of the instructions makes the assembly more difficult.
The steering wheel is of this type.
Electroplating parts.
The tail structure is also very interesting.
The rear of the car looks very “rich”.
The rear lights are also represented by a large number of basic bricks.
Compared with Icarus size.
The 2 and 3 speeds used in the APP are the same. With this size, the speed is good. Turning back to normal, but unable to walk in a straight line, I don’t know if it is caused by poor assembly.
