
Hello, everyone, today brought by the fat editor [virtual evaluation] Ustar MOULDKING building block 14003-M4 (Bernelli M4 shotgun)
Basic Information
It looks good in kind.
Popular science:
The working principle of the very handsome real gun simulation:
Box photo
1061 shotguns, one of the most common guns in the United States.
Behind the details, the lower right is the introduction of the gun. The finished size is on the upper right.
Finished product size: 70.5*4.3*15, unit cm
Introduction to guns
All Yuxing series [high bricks] parts blessing, please rest assured to buy!
Contents
1 inner box
4 steps subcontracting.
Universal bag and rubber ring bag (there are 2 special pieces inside).
Steps are subcontracted, shooting people and animals is prohibited
Maybe the sticker fell out during transportation. The battle was damaged, but fortunately it was still usable.
Assembling process
Let’s fight, all parts are black! (Note that there is a pack of smooth bolts in the universal bag, don’t mix it up)
The 2.4cm marked on the rubber ring is the diameter.
The smooth is bolted in the universal bag, remember not to mix it up.
The smooth bolt function is such that it can move smoothly.
A bunch of black, pay attention to spelling mistakes.
When each rubber band is finished, be sure to test whether it is linked.
At step 64, it is impossible for a complete part to be inserted through the rubber band. It should be inserted into one side at step 63.
Test whether the plate chicken is delicious.
The interior is almost completed, the overall difficulty is not big, that is, the manual is all black, everyone should pay attention to it.
Does it look good? Not two special pieces of [High Brick].
The real gun is said to be able to retract the butt, but it looks like it. . . . .
Step 127, a short and smooth bolt, can’t see any effect, I don’t know if it is spelled wrong.
After the combination, the length is OK, not longer than the workbench, but the lighting is not even enough.
This stick is a bit thick.
In step 188, the rubber band is installed here, so don’t miss it.
In fact, the handguard can be changed to a wood color, so the degree of reduction is even higher.
Test the loading of the handguard.
Electroplated parts, the effect is ok.
The texture comes as soon as the light panel is on. .
Ready to play
A set has 2 magazines, a total of 4 bullets.
Reloading clip
finished
Finished product display
360-degree display of finished products
detail
It is here to throw the shell.
Pull the left side mechanism, turn the silver-plated piece upwards, put in the magazine, pull back the silver-plated piece, and let go of your left hand. Complete the loading process.
Aiming at the angle of view.
Shooting, but the kinetic energy is small, and the cup can only last a bit.
While throwing a shell, he was so handsome as a PPPPP. (The editor of Form 2 is here again)
Summarize
First summarize the need to pay attention to the situation:
Note that there is a pack of smooth plugs in the universal bag, don’t mix it up
At step 64, it is impossible for a complete part to be inserted through the rubber band. It should be inserted into one side at step 63.
Step 127, a short and smooth bolt, can’t see any effect, I don’t know if it is spelled wrong.
In step 188, the rubber band is installed here, so don’t miss it.
advantage
The shell-throwing action is too handsome, and the editor has already suffered a second illness.
shortcoming
The handle is relatively thin and difficult to grasp.
She is handsome when throwing shells, but she often has to bend down to pick up the magazines, and she is tired.
The launching mechanism is more difficult to match the magazine mechanism, and sometimes there will be a depressed situation that can not shoot.
Suggest
Likes/dislikes are worth buying!!