First of all, the box photo shows that the camouflage effect is only partial, most of the color is still desert yellow
The back is the introduction of the movable part
There is also a gift of carbon fiber cross shaft
The dynamic upgrade package needs to be purchased separately (the power package is too poor to buy)
Simple outer box packaging, there is no inner box inside, stuff is packed full, very economical
Pour out all the contents inside
The post is too big, and some of it is exposed and crushed
The sticker should be cut properly. It is recommended that if there is a large opening in the future, the sticker can be designed into two, and the sticker can be clipped in the manual to prevent the sticker from being crimped.
Public package and free carbon fiber cross shaft
Some larger special pieces are also included in the public package
The quality of the blue plug and black plug are very good
The whole car is divided into 6 packages
First pack
Gear meshing effect is very good
Second pack
There are two styles of shock absorbers
The two lights on the front face are officially provided with a transparent part and a light gray part for the player to decide which one to install
Third pack
Instrument section
Front hood complete
Fourth pack
Here is also for players to choose the color of the car lights
The car shell without the axle is so strange
Fifth pack
The tailgate at the rear of the car is completed
Sixth pack
The number 6 is underlined to distinguish 6 from 9
There is a missing part here, there is a lack of a three-unit circular hole technology beam that protrudes from the middle and turns to the cross void (it is difficult to describe this part, let’s see the picture)
Finally, I found the parts I needed in the parts library by myself
The sticker that was folded before is wrinkled after being pasted
Itโs more interesting to install axles like this
Finish
Finally, the tires
The wheels and rims are of good quality
Finish
The front face is really Fangzheng
Double spring suspension, installed in accordance with the instructions
The rear axle uses a large spring suspension
The back door can be opened
The small piece on the door can be opened by turning it downward by 90ยฐ
The previous exposure was a bit too far, causing chromatic aberration, this color is finally adjusted
Design stairs on the door
The door can be opened
Seats, etc. are all reduced in proportion
The hood can be opened
The static version of the gimbal installed inside has no functionality, only dynamic can be used
There are also many steps in this set. I donโt know what the specific function is, such as the double-hole part on the rear axle.
Powerful chassis
That’s it for today’s content, thank you for your attention
