Hello everyone! Recently, many friends asked me to try this set of topics, but too many friends asked me, and I had decided not to accept it. I also want to know why it can attract so many friends’ attention, so I just… serve the people. Bar!
【Box Photo】
It has to be said that the packaging feels very similar to ordinary toys, and it may not be obvious at first glance that it is a building block!
The outer box has no manufacturer information at all. Strictly speaking, it is a set of three products without…
【manual】
It is no different from the general manual. The steps are very careful, reasonable and very standard!
There is this small revision page in the middle.
This is stated on the homepage! But I didn’t make a reservation. I can buy the first batch with electroplated parts if I choose a random place and place an order…
【Parts package】
Bag A is divided into 10 steps.
Bag B has 8 sub-packages.
There are also tire skins and free electroplated parts.
【Assembly process】
Step subcontracting is very reasonable.
The body is like this.
The legs are ok, try to group them together~
Because of its huge size, it takes some effort…
alomost done!
Finally, add the head and laser gun to get it done~
A small partner said that this set used the look of the 2018 movie “Bumblebee”, and after checking it, it turned out to be very similar!
【Multi-faceted photo of finished product】
The finished product is really domineering! The total height is about 45cm, super huge.
[Details]
The head is good, and the “mask” is still printed.
Activity is average.
The details of the body are rich, and a variety of techniques are used to restore it. It is not only reasonable, but also very stable, and the design level is quite high.
But the disadvantage is also obvious, that is, zero activity…
The arm also has many joints (including fingers!).
The hands can be supported even when raised like this!
The wrist is just a bit short, a small ball-shaped joint cannot support the laser gun, causing x lift…
The skirts are all positioned with ball joints.
The legs also have joint structures, but the thighs and soles of the feet are double joints, with extremely limited mobility, so even with an active knee joint, it is useless.
【Poses for Mecha～】
Brother Zhu, who seems to be active, can’t actually pose any poses…
So fail directly!
I can only stand and take pictures
Pictured with MPP10, the size is rolling!
Compared with the Lego minifigures, it is even more terrible…
Add a photo of the sonic (unfinished) I did before
Sonic: I can change straight, how about you, Brother Zhu?
Brother Zhu: Uh…I am more stable than you…stable!
【Summarize】
The performance of the finished product is very good, and there are many interesting techniques in the design, especially the various SNOTs are of great reference value.
As for the quality of the parts that many friends are concerned about, from the surface of the parts, I can’t tell which factory it comes from. The hand feels a bit hard and the bite is not tight, but the fingers will hurt a bit after finishing the spell…
The finished product is quite low in mobility and cannot be deformed. There is no playability other than standing corpses.
Obviously, the manufacturer is very clear about the shortcomings of this set. The positioning of this set is ornamented, so the appearance is highly restored, the structure is firm, and the size is huge. If you want to buy and play, sorry, this set does not meet the requirements.
